Alternative Workplace Strategy: Remote, Backup Office, Reciprocal

A comparison of remote working, a backup office, hot/warm/cold sites and reciprocal agreements; roles where remote working isn’t enough, VPN capacity and how to test.
Technical summary
Technology
ISO 22301, remote access (VPN/ZTNA), call forwarding
Topic
A workplace strategy against loss of facilities
Level
Intermediate
Prerequisites
  • Business impact analysis and critical process list
  • Process-based RTO targets
In this article7 sections

If the office building can’t be entered because of fire, flooding, a long power outage or an official access ban, business continues only with an alternative workplace chosen and prepared in advance. The classic answer to this question is “everyone works from home”. For some roles that’s true; for others it’s an assumption that leaves the plan on paper. Below we compare remote working, a backup office, a commercial recovery site and reciprocal agreements in terms of cost, preparation time and suitability, and give criteria for identifying roles where remote working isn’t enough, plus a preparation checklist.

Loss of facility scenarios

The strategy isn’t built around a single scenario. Each type of facility loss breaks a different assumption:

  • Loss of the building only: Fire, flooding, structural damage. Staff, city infrastructure and internet are working; the building can’t be used. Remote working and a nearby backup office are usually enough.
  • Regional incident: Earthquake, flood, widespread power or communications outage. Staff themselves may be affected; homes have no power or internet. A backup office and a reciprocal agreement partner in the same region are very likely affected too.
  • Access restriction: The area being closed for security reasons, transport disruption. The building is intact but can’t be reached.
  • Loss of in-building infrastructure: Loss of the server room, PBX or network core. The building can be used, but the working environment doesn’t function. The desks are there, the core switch is burned out. Work still stops.

The regional scenario shows why geographic separation is essential. If the backup site shares the same risks as the main site (the same fault line, the same flood zone, the same electricity distribution zone), the strategy fails at the moment it’s needed most. Continuity of production lines is a separate planning topic; here we focus on the office and staff workplace. For the production side, see the article IT/OT business continuity at manufacturing sites.

Comparing alternative site options

Clause 8.3.3 of ISO 22301:2019 requires continuity strategies and solutions to be selected considering their ability to continue activities within the required time frames and at the agreed capacity, the risks being faced and costs and benefits. Compare workplace options using these three criteria too.

Option Preparation time Cost When it fits
Remote working Hours (if the infrastructure is ready) Low Knowledge work done with a laptop and remote access
Another branch / location Hours–1 day Low to medium Organizations with several locations
Own backup office (hot) Hours High Teams with a short RTO that must work on site
Commercial recovery site (hot/warm) Hours–days (depending on the contract) Medium–high (subscription) Teams that need desks, phones and network ready and waiting
Cold site / flexible office rental Days–weeks Paid for at the time of the incident Processes with a long RTO, long-term loss of facilities
Reciprocal agreement Days Low Group companies, close business partners

A hot site is where workstations, network connections and phones are ready and waiting, and staff arrive and start working directly. At a warm site, furniture, power and network infrastructure are ready; devices need to be brought in or set up. A cold site is just physical space. In commercial recovery site contracts, the real questions are how many customers the same desk is committed to and how priority is decided in a regional incident. If the contract is silent on this, the hot site assurance is weak.

Reciprocal agreements look cheap but are the weakest option. The partner’s spare capacity erodes over time, both sides can be affected by the same incident and the agreement is often not in writing or tested. Between group companies, it becomes a reasonable option once capacity and security conditions are written down and tested. Not without testing.

Roles where remote working isn’t enough

Before accepting remote working for every role, question it role by role. Roles that answer “yes” to any of the questions below need either an alternative physical site or extra preparation for remote working:

  1. Is there physical input or output? Wet-signed documents, company stamps, physical mail, samples, shipping paperwork.
  2. Is special hardware needed? A high-performance CAD workstation, measuring equipment, a multi-screen operations console, a card printer or label printer.
  3. Is there a confidentiality restriction? Customer contracts or prototype protection requirements may require information to be processed only in a controlled area. If remote working breaches this restriction, it can’t be used as a strategy without prior customer approval.
  4. Is voice and call infrastructure decisive? Call forwarding and recording requirements for the call center, technical support line and switchboard operators.
  5. Payment and treasury operations: Banking tokens, dual approval mechanisms and physical security devices often stay in a drawer at the office.
  6. Is the home environment suitable? In a regional incident, staff homes may be affected too; in that case, the remote working strategy may become entirely invalid.

The output of this analysis is a “can continue remotely / partially / must be on site” classification for each critical process in the BIA, and the number of desks needed for on-site roles. The number of desks is the basis for the alternative site contract or the size of the backup office. It’s calculated from the role list, not by estimate.

Resource requirements: equipment, access, logistics

For the alternative site to be really usable, list the resource requirements by process:

  • Endpoint devices: Do staff have their laptops with them? Is there a pool of spare devices for teams using desktops, and are these devices waiting with a current image and enrolled in management tools? A laptop that has sat on a shelf for six months spends hours downloading updates when first turned on.
  • Remote access capacity: Are the VPN or ZTNA infrastructure’s license and concurrent session capacity enough for all staff to connect at once? The firewall’s SSL VPN user limit and CPU capacity are often not sized for several times daily use. If the remote access gateway runs in the lost building, the strategy defeats itself.
  • Phones and call forwarding: Is forwarding landline numbers to mobiles or a cloud PBX defined in advance, and who will do it and how?
  • Authentication: Do staff have their multi-factor authentication devices with them? Is there access that requires a card reader or a hardware key kept at the office?
  • Logistics: Staff transport to the alternative site, shuttle arrangements, accommodation needs, meals and physical security.
  • Documents and supplies: Printed forms, company stamps, copies of critical physical documents.

Remote access architecture is a continuity decision too; for the options, the article ZTNA or VPN? compares the decision criteria. To prevent relaxations such as “let them connect from their personal computers for now” in a crisis, device, network and screen privacy rules must be defined in advance in the remote working security policy.

Testing the alternative site

The alternative workplace is one of the strategies that looks most easily validated on paper in continuity and compliance audits, yet is least tested. Testing can take these forms:

  • Capacity test: All staff connecting by remote access at the same time on a set day. Remote access capacity, bandwidth and authentication infrastructure are seen under real load. The license limit usually shows up here.
  • Team relocation test: A team that must work on site (for example finance or customer service) working from the alternative site for a full business day.
  • Call forwarding test: Forwarding landline numbers and reversing it.
  • Commercial site activation test: Running the provider’s activation procedure and measuring whether the site is ready within the time in the contract.

The test criterion isn’t “we could connect”. Whether the team could carry critical business steps (order entry, payment approval, customer calls) through to the end is recorded. These tests are added to the annual program as functional exercises; for designing the program, see the article types of business continuity exercise.

Preparation checklist

  • Loss of facility scenarios (building, regional, access, infrastructure) have each been assessed.
  • Each critical process has been classified as remote / partial / must be on site.
  • The number and location of desks for on-site roles have been set.
  • The alternative site doesn’t share the same regional risks as the main site.
  • The activation time and priority rule are written into the commercial site contract.
  • Remote access capacity has been tested for all staff; the access gateway doesn’t depend on the main building.
  • The call forwarding procedure is written down and tested.
  • The spare device pool is up to date and enrolled in management tools.
  • Customer confidentiality requirements are compatible with the alternative site and remote working.
  • Getting to the alternative site and activation steps are in the BCP task list.

The alternative workplace strategy must be based on BIA results and process targets. To establish this link, you can start with business continuity plan and business impact analysis work, and to document the strategy choice in line with ISO 22301 clause 8.3 requirements, you can draw on the ISO 22301 business continuity management approach.

Frequently asked questions

If everyone can work remotely, is an alternative workplace needed?

If the building is lost, remote working may be enough for most knowledge work. In a regional incident, however, staff may have no power or internet at home; roles involving physical documents, special hardware or confidentiality restrictions can’t be continued remotely either. A small physical alternative site plan is still needed for these roles.

What’s the difference between hot, warm and cold sites?

At a hot site, workstations, network and phones are ready; staff arrive and start working immediately. A warm site has furniture, power and network infrastructure, but devices need to be brought in or set up. A cold site is just physical space; all the infrastructure is set up after the incident.

How far from the main office should the alternative workplace be?

There’s no fixed distance. The criteria are that the alternative site doesn’t share the same regional risks as the main site (earthquake, flooding, electricity distribution zone, transport route) and that staff can reach it in a reasonable time. Both conditions are assessed together.

How is an alternative workplace tested?

You can run a remote access capacity test with all staff connecting at once, a relocation test with a team that must work on site working from the alternative site for a business day, a call forwarding test and an activation test with a commercial recovery site provider. The criterion is being able to carry critical business steps through to the end.

Support

Contact us for support or a discovery session on this topic.

Contact form
[email protected]

Eretek Compliance

We work with you on compliance with ISO 27001, IATF 16949, TISAX and similar standards, covering risk assessment, control design, documentation and audit preparation.

Knowledge Center

Other articles