If, at the end of months of preparation, the location the customer expects doesn’t appear on the label, the problem is usually not in the assessment but in the registration. The TISAX application is an administrative process that runs separately from internal preparation: participant registration on the ENX portal, defining the scope and locations, accepting the terms of participation, choosing an audit provider. A typo or scope error made here carries straight through to the result. The steps below are listed for the information security owner or project manager who will run the application.
The relationship between ENX and TISAX
TISAX is an assessment and exchange mechanism operated by the ENX Association on behalf of the German automotive industry association VDA. The division of roles determines what to expect from whom:
| Party | Role |
|---|---|
| VDA | Owner of the VDA ISA catalog |
| ENX Association | Operating TISAX, registration, the portal, authorizing providers |
| Audit provider | The organization that carries out the assessment, authorized by ENX |
| Participant | The organization assessed, or a partner viewing the result |
ENX doesn’t carry out assessments. Authorized providers carry out the assessment; ENX manages registration, oversees providers’ compliance and enables secure sharing of results between participants. Current process descriptions and the participant handbook are published on ENX’s official website. The steps below are the general flow; screen and field names may change with portal updates.
Participant registration
Registration is done in the name of the legal entity to be assessed. Before you start, gather this information in a single working file:
- The legal entity’s full trade name and registered address (written exactly as in the trade registry records).
- The main contact and a backup: the people who will run the TISAX process and correspond with ENX and the audit provider.
- Billing details and a billing contact.
- An authorized person who can accept the terms of participation on behalf of the company.
The TISAX terms and conditions of participation are accepted during registration. The terms contain binding provisions on the use of results, confidentiality and the parties’ obligations; they shouldn’t be accepted without being read by the legal unit or an authorized executive. When registration is complete, ENX sends the identification numbers for the participant and the scope. These numbers are used in all later correspondence, in the provider contract and when sharing with the customer. Record them immediately.
In groups of companies, the first decision is which legal entity will register. The deciding factor is the company that has the contract with the customer and actually handles customer information or prototypes. If sites belonging to different legal entities will go into the same registration, clarify in advance whether this is possible and under which name the customer will look for the result. If the name in the customer’s supplier system differs from the name in the ENX registration, a matching problem arises at sharing.
Defining scope and locations
The assessment scope is defined during registration: which locations, which assessment objectives.
Standard scope
The approach recommended in TISAX and expected by customers is the standard scope: all processes, procedures and resources relevant to the assessment objectives at the defined locations are in scope. A custom scope is technically possible, but whether the customer will accept it is uncertain. Details of the scope decision are in the article TISAX scope and location selection.
Locations
Each location is entered separately with its full address. Things to check:
- List all sites where customer information is processed or prototypes are kept. A mistake you may come across is entering only the head office.
- If there’s more than one building in the same city, decide separately whether each is in scope.
- A data center (colocation) or cloud services obtained from an external provider are usually handled not as a location but as a supplier relationship, and assessed within the supplier management controls in the ISA. If you run your own server room or data center in a separate building, it should be considered as a location.
Assessment objectives
The objectives selected based on the customer’s request are added to the scope. Because objectives also determine the level, this choice directly affects whether the assessment is done remotely or on site. For what the objectives mean, see the article TISAX labels.
Choosing an audit provider
ENX publishes the list of authorized providers; the contract is made directly between the participant and the provider. Price isn’t the only criterion:
| Criterion | Question to ask |
|---|---|
| Language | Can interviews be held in Turkish, and what will the report language be? |
| Calendar | Does the provider have auditor capacity for the target date? |
| Location access | How is the on-site visit planned for AL3? |
| Evidence submission | Through which channel and in what format will evidence be shared? |
| Post-finding process | How is the corrective action assessment run? |
Before the assessment, the provider usually holds a kick-off meeting; the scope, objectives, locations, schedule and evidence-sharing method are confirmed there. Catch any inconsistency between the registration details and what was sent to the provider at this stage. One more rule: because of independence requirements, the provider that will carry out the assessment can’t consult for you on the same scope. Keep preparation support and assessment roles separate.
Workflow from registration to assessment
The application steps run in parallel with TISAX assessment preparation. The order below is an example showing how the administrative steps fit into the preparation schedule; because durations vary with the organization’s maturity, the table shows order, not duration.
| Sequence | Administrative step | Parallel internal work |
|---|---|---|
| 1 | Confirming the customer request | Label and location decision |
| 2 | ENX registration and ID numbers | Starting the VDA ISA self-assessment |
| 3 | Getting quotes from providers | Gap list and improvement plan |
| 4 | Provider contract and date | Preparing the evidence file |
| 5 | Kick-off meeting | Final version of the self-assessment |
| 6 | Assessment | Process owners available |
A planning mistake you may come across is fixing the assessment date only according to the date the customer wants, without looking at the real state of internal preparation. Before fixing the date, finish an honest first version of the self-assessment and estimate how long open controls will take to close. The schedule comes after the evidence. How maturity scoring is done is explained in the article VDA ISA maturity levels.
If a change of location, contact or objective is needed after registration, update the registration via the portal or by contacting ENX, and also notify the provider of the change in writing. Scope changes after the assessment has started may require the plan and the quote to be revisited.
Sharing results
When the assessment ends, the results are transferred to the ENX portal, but the customer doesn’t see them automatically. The participant does the sharing:
- In the portal, select the participant (customer) to share with.
- Set the sharing level. Levels are graded, from showing only the labels to more detailed sections of the report.
- Confirm the sharing and tell the customer which ID number to use to access the result.
The rule is simple: don’t share more than the customer asks for. The detailed report may contain findings and descriptions of internal processes. Publishing labels so they’re visible to other participants in the portal is also optional; it provides visibility to potential customers, but it also reveals which locations were assessed.
Common registration mistakes
- Wrong legal entity: In groups of companies, registering in the name of the holding or a sister company instead of the company that has the contract with the customer.
- Missing location: A prototype warehouse, design office or second production site not being on the list.
- Vague objective selection: Selecting AL3 objectives “just in case” without confirming with the customer.
- Person-bound contact: Registering with a single person’s email address, and notifications being lost when that person leaves.
- Not recording ID numbers: Searching for them when the customer asks for the number to share.
- Mismatch between contract and registration: A different list of locations or objectives in the provider’s quote.
Pre-application checklist
- The customer’s request letter and the labels required are in hand in writing.
- Legal entity details have been compared with registry records.
- The location list has been prepared with full addresses, and the scope decision documented.
- The terms of participation have been read by an authorized person.
- Contacts and their backups have been defined.
- The provider’s quote has been compared with the registered scope.
- The customers to share with and the expected sharing level have been noted.
After registration, the internal preparation schedule begins; for the general framework, see the TISAX preparation guide. If you want your registration and scope decisions reviewed before the assessment, our TISAX pre-assessment preparation service includes these checks.
Frequently asked questions
Can we talk to an audit provider before completing ENX registration?
Yes, you can talk to them for preliminary information and a quote. However, the assessment is tied to the scope and identity information created during registration; ENX registration must be complete before the assessment date is fixed.
What happens if we enter the wrong location during registration?
Assessment results are tied to the registered scope and locations. A missing or wrong location can lead to the site the customer expects not appearing on the label. When you notice the error, contact ENX and correct the registration before the assessment.
Do results go to the customer automatically?
No. The participant decides with whom and in how much detail results are shared. Sharing is done via the ENX portal, with a specific participant and at the chosen sharing level; until shared, the customer can’t see the result.
Does the registration fee also cover the assessment fee?
No. ENX invoices the registration fee; the assessment fee is set by the contract you make with the provider you choose. Check the current registration fee on the ENX website.