The VDA ISA2027 Transition: Checking the Catalog Version in TISAX Preparation

ISA2027 will apply to TISAX assessments ordered on or after 1 January 2027. The order date is what decides; what to check so you don’t prepare against the wrong catalog.
Technical summary
Technology
VDA ISA2027 (ENX announcement 01.07.2026)
Topic
Version transition
Level
Intermediate
In this article6 sections

The most expensive mistake in TISAX preparation is working to the wrong catalog version. An organization that collects evidence against ISA 6 for months and leaves the order until 2027 gets questioned against a different catalog when the assessment starts. VDA published ISA2027, the new version of the information security question catalog used in TISAX assessments, on 1 July 2026. According to ENX’s announcement, ISA2027 will apply to all TISAX assessments ordered on or after 1 January 2027. Below is the transition’s impact on preparation projects and what needs to be checked. (Last checked: 8 November 2026.)

What has been officially announced

Facts first. Don’t plan based on a consultant’s opinion, a forum post or “what we’ve heard”; the table below summarizes the ENX announcement.

Topic ENX announcement (summary)
Publication VDA published ISA2027 on 1 July 2026; the English version is authoritative.
Implementation TISAX assessments ordered on or after 1 January 2027 are carried out with ISA2027.
Previous version ISA 6 has been used for assessments ordered since 1 April 2024. According to the ENX downloads page, assessments ordered before 1 January 2027 can be carried out with ISA 6; the page also gives March 2027 as the last date an initial assessment can be opened with ISA 6. Confirm the date for your own order with your provider.
Naming The year of application will be used instead of version numbers; an annual publication cycle is planned. The date given for the next catalog is an expected timeline, not a confirmed publication date (ISA2028 is expected to be published in summer 2027).
Labels Existing labels remain valid for their term; labels stay valid for a maximum of three years. Annual versions don’t increase the reassessment frequency.

The deciding date is the order date, not the audit date. This distinction directly changes planning: an order placed in December 2026 and one placed in January 2027 can tie two assessments held in the same week to different catalogs. Another practical point is that the English version is authoritative. If you work internally from a Turkish translation, compare every phrase open to interpretation with the English text; the auditor looks at the English text.

Notable content changes

  • Mappings: NIST CSF 2.0 mappings were updated, ISO/IEC 27001:2022 mappings were reviewed and IEC 62443 mappings were clarified; ISO/IEC 27001:2013 references were removed.
  • Language and structure: Wording and structure were reviewed; the meaning of the phrase “considerations” was formally defined.
  • Supply chain: Supplier requirements were strengthened for high protection needs; for very high protection needs, requirements such as a TISAX label, an equivalent assessment or a supplier audit for suppliers came to the fore.
  • Prototype protection: Control groups were simplified (organizational requirements, and physical and environmental security); new controls on traceability and disposal were added.

Consultants’ comments on control counts are in circulation; for definitive content, the catalog published by ENX/VDA should be taken as the basis.

What do these changes touch in the field?

Removing ISO/IEC 27001:2013 references looks like a small job on paper. It isn’t. In organizations whose policies and procedures still use the 2013 version’s Annex A clause numbers (such as A.9, A.12), the link between the evidence matrix and the catalog breaks; when the auditor asks for a control’s counterpart, the team has to translate from the old number to the new one. That’s lost time on assessment day and gives an impression of inconsistency.

The formal definition of “considerations” is also important. Until now, these items could be interpreted differently; some teams treated them as optional suggestions, others evidenced each one as if it were a mandatory requirement. Read the definition in the ISA2027 text and reassess the answers in your self-assessment against it.

On the supply chain side, the real work is the inventory. An organization that doesn’t know which supplier accesses information with very high protection needs can’t decide what evidence to ask that supplier for either. A situation you may come across: engineering firms that access design data, and couriers or cloud sharing services that carry CAD files, don’t appear on the supplier list at all.

Decision table for organizations in preparation

Your situation Recommendation
You’ll order the assessment by the end of 2026 Prepare with ISA 6; note the ISA2027 differences and add them to the preparation list for the next cycle.
Your order will fall in 2027 Do the gap analysis and documents directly against ISA2027.
You have a label, with renewal in 2027 or later Do an ISA2027 gap analysis; focus particularly on the supply chain and prototype protection changes.
You have a prototype protection objective Set up the records corresponding to the new traceability and disposal controls now.

The first row of the table is the most debated situation. Ordering at the end of 2026 and proceeding with ISA 6 is a legitimate path; but make sure the order will really be finalized within 2026. If the order slips into January because of purchasing approval, a revised proposal or supplier selection, the catalog you prepared for and the catalog that applies won’t match. That’s why noting the ISA2027 differences from the start as a plan B is cheap insurance.

Prototype protection: records should start now

Traceability and disposal controls require evidence going back in time. A disposal logbook opened in assessment week shows the auditor nothing but empty pages. In organizations working with prototype parts, test vehicles or camouflaged vehicles, start operating these records today:

  • Entry–exit record: When the prototype enters the site, changes area and leaves; who handed it over and who received it.
  • Transport record: The vehicle, cover or crate used, the route and the person responsible for supervision.
  • Disposal record: Which part was disposed of, by what method and under whose supervision; a photo or disposal report if needed.
  • Photography and image management: Camera and phone rules in the prototype area, and who approves exceptions.

Records alone aren’t enough. The consistency of the records is also questioned: a part with an entry record but no exit or disposal record is the first question raised in the audit.

Transition checklist

  1. Confirm in writing with your assessment provider your assessment order date and which catalog will apply.
  2. Fill in the self-assessment in the correct catalog version.
  3. Classify your supplier inventory by protection needs; decide what evidence you’ll ask for from suppliers who access information with very high protection needs.
  4. Review traceability (entry–exit, transport) and disposal records in prototype areas.
  5. Update document references to the ISO/IEC 27001:2022 structure.

The order isn’t accidental. Every document revision made before the catalog version is settled is work you may have to redo; lock the version first, then move on to content. Now that the annual publication cycle has begun, write this check into your process calendar not as a one-off but as the first step of every preparation cycle.

Eretek isn’t an ENX-approved TISAX assessment provider and doesn’t issue TISAX labels. This guide is for general information; ENX’s official documents should be taken as the basis for current rules.

Frequently asked questions

If we order at the end of 2026 and are assessed in 2027, which catalog applies?

According to the ENX announcement, the order date is what decides. Details and edge cases should be confirmed in writing with your assessment provider.

Was a new assessment objective added for ISA2027?

No new assessment objective was announced in the ENX announcement; the changes focus on control content, mappings, the supply chain and prototype protection groups.

If a new catalog comes out every year, will reassessment be needed every year?

No. According to ENX, the annual publication cycle doesn’t increase the reassessment frequency; labels remain valid for their validity period.

For an ISA2027 gap analysis and preparation, take a look at our VDA ISA Gap Analysis and TISAX Consulting services.

Support

Contact us for support or a discovery session on this topic.

Contact form
[email protected]

Eretek Compliance

We work with you on compliance with ISO 27001, IATF 16949, TISAX and similar standards, covering risk assessment, control design, documentation and audit preparation.

Knowledge Center

Other articles